Total performance in essential services
Request a Quote / Book
Shop Online

Kent Benmore Wood Fire

  • Kent Benmore Wood Fire
  • Kent Benmore Wood Fire
  • Kent Benmore Wood Fire

Kent Benmore Wood Fire


Free Shipping NZ Wide

SKU: N/A Category: Tags: ,

Product Description

Kent Benmore Wood Fire



  • Clean air approved small-size radiant wood fire
  • Contemporary matt black design, 5mm steel
  • Vermiculite brick lined firebox
  • Multi-burn firebox helps glass remain clear
  • Steel plate top for cooking use
  • 10 year firebox warranty
  • Made in New Zealand


  • Estimated maximum heat output: 14kW
  • Heats area up to 150m² (typically up to three standard rooms)
  • Average emission rate: 0.80g/kg
  • Overall average efficiency: 69%
  • ECAN Authorisation No. 165499
 Designed and made in New Zealand for over 30 years, we understand the importance wood fires play in heating our homes. We develop products that enable Kiwis to use this natural and renewable resource with minimal impact on the NZ environment.

Will a Kent Benmore Wood Fire heat my whole home?

The correctly sized wood fire for a home is important.

Too large and it will be forever run on low causing poor combustion and creosote problems restricting the flue updraft.

Too small and it will fail to generate sufficient heat to warm the area.

Kent always recommend a site check of the home by a certified fire installer before installation. Bear in mind that while the wood fire may generate sufficient heat it then has to be circulated throughout the home. If the house doesn’t allow natural dispersal of heat (e.g high ceilings, long hallways etc) circulation can be improved with a ceiling fan or heat transfer kit.

Are Kent wood fires made in New Zealand?

Yes – manufacture takes place in Auckland using the latest production techniques, robust materials and quality controls. Each fire has a unique serial number, providing peace of mind if a problem ever needs to be rectified.

How often should I empty the Kent Benmore Wood Fire ashes?

Due to the high efficiency of Kent wood fires, ash removal should only be necessary every few weeks. Ashes can be scooped up and removed easily through the door opening. Kent wood fires work best when a small amount of ash (approximately 20mm deep) is left in the firebox after cleaning. This insulates the bottom and prevents the base of the wood fire overheating and burning out. In fact, building up the ash bed helps extend the long burn cycle, while reducing the ash bed encourages greater heat output.

Any questions? Call us on 0800 182 182 or email

Additional Information


Kent Benmore, With Flue Kit


There are no reviews yet.

Be the first to review “Kent Benmore Wood Fire”