FREE SHIPPING NZ WIDE
Rinnai Infinity VT16 External LPG or NG
Installments by available between $0.00 - $1,000.00 Learn More
The Rinnai Infinity VT16 External is a continuous flow gas hot water system for external domestic applications. This type of hot water system produces endless hot water, and is a energy efficient water heating system, because it’s only on when you need hot water.
The all-new Rinnai Infinity VT16 External range has an improved minimum start-up flow rate, saving on water, and ensuring your Rinnai INFINITY® is future proofed for water efficient tapware.
• external domestic applications
• low hot water demand applications (small apartments or homes)
• mains and medium pressure systems
• solar installations as a gas boost
Hard or acidic water will need to be treated to use this product.
Available for Natural Gas or LPG. Specify Rinnai Infinity VT16 External gas type at time of purchase.
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.
|Input:||125 MJ/h or 35 kW|
|Energy Star Rating:||6.2 stars|
|Factory Preset Temperature:||55 °C|
|Capacity||Hot water capacity: 1.5 to 16 litres per minute
Nominal water capacity: 16 litres per minute at a 25 °C rise (960 L/h)
|Connections||Hot water outlet: R½ (15 mm)
Cold water inlet: R½ (15 mm)
Gas supply: R¾ (20 mm)
|Exhaust System||Forced flue|
|Frost Protection||Fitted as standard.
Frost protection operates automatically, as long as the appliance is connected to the electrical power supply, by activating when the temperature inside the unit drops below 3.5 °C, and turns off once the temperature inside the unit reaches 7 °C.
|Ignition System||Direct electronic ignition|
|Injector Size||NG: 0.85, 1.30
LPG: 0.70, 1.05
|Line Pressure (min.)||NG: 1.13 kPa, LPG 2.75 kPa|
|Line Pressure (max.)||3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).
In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.
|Power Consumption||Normal: 38 W (NG), 43 W (LPG), Standby: 2 W, Automatic Frost Protection: 74 W|
|Pressure Relief||Valve opens at 2060 kPa, valve closes at 1470 kPa|
|Noise Level||50 dB(A)|
|NOx af||Less than 60 ppm|
|Safety Devices||Flame failure, boil-dry protection, oveheat protection, fusible link, pressure relief valve and combustion fan rpm check|
|Water Supply||Nominal operating pressure: 120-1000 kPa
Activation flow rate: 2.4 litres per minute
|Compliance||ES: Supplier Declaration of Compliance
• Declaration Number: 970820094
• Certificate Number: 6330
LPG, Natural Gas